Subject: 9600 FULLDUPLEX on the Pac-Comm TNC-220
                  by D. Hulatt G4WFQ 19th Aug 90
                  ------------------------------
 
Locate 74HC4020 and remove from IC socket
 
CAREFULLY bend pins 1 and 12 up
 
Solder flying leads to pins 1 and 12 on 74HC4020
 
Solder flying lead to pin 12 on SIO 8530 chip
 
Use a SPDT switch to switch to 2 signals from 4020 to SIO
 
Replace 4020
 
Drill 1/4 inch hole in rear plate above RS232 slot
 
Insert switch and secure.
 
Thats it.  Throw switch for 9600 FULLDUPLEX operation, revert for
normal.  NB: You still have to change buad rate in s/w.
 
I hope this information will be of use to some. I would like to thank
Uk Agent for trying to get info from Pac-Comm. It must be like trying to
get blood out of a stone.
 
Thanks Pac-Comm, no need to bother now I've done it myself!
 
73 de Dave G4WFQ @ GB7PET AUK.2404 19 Aug 90